Autodesk SAMREPORT-LITE 2006 Bedienungsanleitung PDF herunterladen (Seite 12)

Autodesk® Network License Manager

The Host ID also known as MAC Address or Ethernet Address can be obtained in two ways.

Using ipconfig /all or LMTOOLS.

To obtain the information, use one of the following procedures.

Windows Command Prompt Procedure for Host Name and ID

To obtain the host name and ID at the Windows command prompt

1. At the Windows command prompt, enter ipconfig /all

2. Record the Host Name and Physical Address line. Eliminate dashes from the physical

address (e.g. “00-1F-16-FE-30-90”). This is your twelve-character host ID (e.g.

“001F16FE3090”).

Note! If your server has more than one network adapter, select the one that corresponds

to a physical network adapter. View the Description field above each physical address. If

there is more than one physical network adapter, it does not matter which one you use.

Devices such as VPN adapters, PPP adapters, and modems are not valid.

3. Close the Windows command prompt.

LMTOOLS Procedure for Host Name and ID

To obtain the host name and ID using the LMTOOLS utility

Important! Do not run LMTOOLS on a remote computer.

You should be logged in with Administrator rights when working with the LMTOOLS utility.

1. Click Start > All Programs > Autodesk > Network License Manager > LMTOOLS Utility.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 54 55

Keine Kommentare

Autodesk SAMREPORT-LITE 2006 Bedienungsanleitung Seite 12